Thiết bị chống sét trên đường dây điện thoại dùng để bảo vệ tổng đài APC/PTEL2
- Thiết bị chống sét cho đường điện thoại APC/PTEL2
APC PTEL2PTEL2 được thiết kế để chống lại các xung đột biến hay xung sét trên đường truyền cho các hệ thống điện thoại, modem, máy fax. PTEL2 có khả năng chống lại những xung đột biến tức thời.Bảo vệ nhiều lần và chống lại các xung đột biến
· Bảo vệ cho đôi dây điện thoại
· Kết nối bằng đầu cắm RJ11
· Lắp đặt dể dàng
· Vỏ bảo vệ bằng nhựa epoxy.
Part number: | PTEL2 |
Xuất xứ: | China |
Hãng SX: | APC |
Bảo hành: | 12 tháng tại Chính hãng |
Dây được bảo vệ: đôi dây điện thoại
· Chế độ bảo vệ: Line – Line và Line – Earth
· Tầng bảo vệ: Di ốt chuyển mạch có tốc độ cao
· Điện áp kẹp: 260V xung 6000V, 1,2/50μs
· Các line bảo vệ: 1,2,3,4 trên đầu nối RJ11
· Đầu nối: RJ11
· Kích thước: 10,4 x 3,8 x 2,5 cm
· Trọng lượng: 88,4g
· Nhiệt độ: -15
0 C đến +50
0 C
Thông số kỹ thuật: http://www.apc.com/products/resource/include/techspec_index.cfm?base_sku=PTEL2
Surge Protection and Filtering
Peak Current Normal Mode
0.20 kAmps
Peak Current Common Mode
0.15 kAmps
NM Surge Response Time (ns)
1 ns
Data Line Protection
RJ-45 Modem/Fax/DSL protection (four wire dual line)
Data Lines Protected
(multi-line only)
3-6 RJ45
Let Through Voltage Rating
< 260
Shipping Height
104.00 mm
Master Carton Units
144.00
Master Carton Weight
18.00 lbs.
Operating Environment
-15 - 45 °C
Operating Relative Humidity
0 - 95%
Storage Temperature
-15 - 45 °C
Storage Relative Humidity
0 - 95%
Regulatory Approvals
CSA,UL 497A,UL Listed
Standard Warranty
10 years repair or replace
Environmental Compliance
RoHS,China RoHS
Catastrophic Event Protection
SurgeArrest components such as MOVs and Thermal fuse ensure instantaneous reaction to lightning strikes and wiring faults. If the surge components are damaged due to power spike or over voltage, excess power cannot reach your equipment. Unlike the APC SurgeArrest products, most surge suppressors continue to let power through even after circuits have been damaged, leaving your equipment exposed to other damaging surges.
ProtectNet Features & Benefits
Data-line Protection
Protection of data lines (Ethernet, Coaxial and Phone lines) ensures complete protection of your equipment from surges. It is very important to protect your equipment from “back door” surges traveling through data lines, as they can be as damaging to your equipment as surges traveling over power lines.
Fail Safe Mode
Most other surge suppressors continue to let power through even after their circuits have been damaged, leaving your equipment exposed to future surges. APC’s SurgeArrest fail safe, which means that once the circuit of an APC SurgeArrest has been compromised the unit disconnects equipment from the power supply ensuring that no damaging surges reach your equipment.
Lightning and Surge Protection
To prevent damage to your equipment from power surges and spikes.